Teledyne Cetac U6000AT+


The J.J. Wilbur Company is proud to offer the Teledyne Cetac Labs U6000AT+ Ultrasonic Nebulizer and Membrane Desolvator. The U6000AT+ provides improved reduction of solvent-based interferences, particularly for volatile organic solvents (both polar and non-polar types).

Use with ICP-AES: For ICP-AES the U6000AT + is used primarily for the introduction of volatile organic solvents. These solvents can cause a number of serious problems: loss of plasma, plasma instability, high carbon emission background, and carbon buildup on the ICP torch.

Use with ICP-MS: For ICP-MS the U6000AT + can be used for both volatile organics and aqueous samples

Higher Nebulization Efficiency: The piezoelectric transducer of the U6000AT + converts more of the liquid sample into a usable aerosol, with an efficiency of 10-15%. With the membrane module connected, the result is a 2x to 5x enhancement of analyte signal vs. a standard pneumatic nebulizer.


Product Benefits


  • Reduced Solvent-Based Interferences: The inert, fluoropolymer membrane desolvator reduces solvent based interferences from water and organic vapor. For example, the % CeO/Ce is typically <0.05% for water-based samples with the U6000AT +. Carbon-based inerferences such as 12C2+ are also greatly reduced, allowing detection of Mg at m/z = 24.

  • Improved Detection Limits: the combination of signal enhancement and reduced interferences enables lower instrument detection limits for both ICP-AES and ICP-MS.

  • Easy Setup: All U6000AT+ units are provided with an interface kit for quick and easy connection to the host ICP-AES or ICP-MS. The kit includes a nebulizer gas line and a sample out line with the appropriate ICP torch adapter. In addition, a rinse kit is included for cleaning the membrane desolvator.

  • Compact Design: The U6000AT + consists of the standard U5000AT+ Ultrasonic Nebulizer and a modular membrane desolvator box. The U5000AT + is simply placed on top of the desolvator box, conserving valuable benchtop space; the footprint of the U6000AT + is 35.6 cm W x 34.9 cm D.

  • Flexibility: The membrane desolvator module can be easily disconnected from the ultrasonic nebulizer if membrane desolvation is not necessary for a particular application. This feature allows stand-alone operation of the ultrasonic nebulizer.​

  • Sample Uptake Rate of 0.5 - 2.5 ml/min

  • Nebulizer gas Flow of 0.5 - 1.5 L/min